Roads and tollhouses · Wales
Holyhead Road (A5) - Wales sectionRoad by Thomas Telford (1815-1830), Wrexham to Holyhead, Wales
- Type
- Road
- Built
- 1815-1830
- Where
- Wrexham to HolyheadWales
- Today
- In use (A5)
- Telford's part
- Engineer
- Location
- 53.1038, -3.9113approximate
Telford's Holyhead Road across north Wales is about 83 miles of engineered road, from the English border near Chirk through Llangollen, Corwen, Betws-y-Coed and the Nant Ffrancon pass to Bangor and Holyhead. It was the first major civil engineering project paid for directly by Parliament, and most of it is still the A5.
What you are looking at
The key rule was the gradient: the road never climbs steeper than 1 in 17. The old road had hills of 1 in 6. Telford achieved this with large embankments, cuttings and revetment walls, rather than following the contours. Along the way are cast-iron-plated milestones set in stone pillars, tollhouses with sunburst gates, a weighbridge at Lon Isaf between Bangor and Bethesda, and big bridges. Three stand out:
- Waterloo Bridge at Betws-y-Coed, a cast-iron bridge of 1815.
- Menai Suspension Bridge, which closed the gap to Anglesey in 1826.
- Stanley Embankment, the causeway to Holy Island near Holyhead.
In the Nant Ffrancon valley, Telford built a new route along the north side, away from the old packhorse road. At Ogwen he preserved the old packhorse bridge beneath his own, Pont Pen-y-Benglog. The Nant Ffrancon section is a long stretch of retaining wall carrying the road along the valley side.
Who built it
The Act of Union with Ireland in 1800 made the road between London and Holyhead a national matter. Telford surveyed the route through north Wales in 1810. Parliament passed the Holyhead Roads Act in 1815 and appointed commissioners, with Telford as their engineer. The commissioners improved the roads from London to Holyhead by Chester and from London to Bangor by Shrewsbury. A further Act of 1819 authorised the Menai Bridge, and the work through Wales finished with its opening on 30 January 1826. The bridge cut the journey from London to Holyhead by about nine hours.
The tollhouses at Llanfairpwll, Caergeiliog and Gwalchmai survive on Anglesey. Since 1995 the Welsh route has been recognised as a historic route worth preserving.
Visiting
- Drive it. The A5 follows the line through Snowdonia, though the A55 is now the usual route along the coast.
- Stop at Ogwen. You can see Telford's road, the old packhorse bridge and the Nant Ffrancon valley from one place.
- Look for the milestones. Telford's milestones were put up between Bangor and Cernioge in 1825 to 1827, and several survive and are listed. Find them all, in order along the road.
Many sites are on a busy trunk road. Park safely and check Traffic Wales for works before you travel.
Questions people ask
How long is Telford's Holyhead Road in Wales?
About 83 miles.
When was it built?
Work began in 1815 and the road was complete when the Menai Bridge opened in 1826.
How steep is it?
The gradient never exceeds 1 in 17 (5.9%).
Is it still in use?
Yes, most of it is the A5.
Why was it built?
To give mail coaches a fast route between London and the ferry port at Holyhead for Dublin.
On the map
Open on the full map · Directions
Nearby Telford works
- Telford Milestone 39, Capel CurigMilestone · 0.4 miles away
- Telford Milestone 40, Capel CurigMilestone · 0.6 miles away
- Telford Milestone 38, Capel CurigMilestone · 1.2 miles away
- Telford Milestone 41, Capel CurigMilestone · 1.4 miles away
- Telford Milestone 37, Capel CurigMilestone · 2.2 miles away
- Telford Milestone 42, Pont Ty-Hyll, Capel CurigMilestone · 2.2 miles away